Panic Bar & Door Closer Installation in Raleigh, NC
Exit doors in an occupied commercial building must open with one motion and no key from the inside. Raleigh Locksmith Group installs and repairs panic bars (exit devices), alarmed exit hardware, electrified exits and door closers so your doors pass inspection, close behind every person and stay secure from the outside.
When you need a panic bar
The NC Fire Code requires panic hardware on exit doors in assembly spaces (restaurants, churches, gyms, event halls) over a set occupancy, in schools, and on any door the fire marshal flags during inspection. Many Raleigh owners meet us for the first time after an inspection letter. We also install exit devices on back doors that staff keep propping open, because a bar with a door closer and an alarm ends that habit.
What we install and repair
We carry rim, mortise and vertical-rod exit devices, closers and the trim to match, so the usual job is finished in one visit.
- Rim and mortise panic bars (Von Duprin, Detex, Dorma, Sargent, Yale) on single and double doors
- Vertical-rod devices for pairs of doors and storefront aluminum doors
- Alarmed exit devices (Detex EAX style) for emergency-only doors
- Electrified exits and electric strikes tied to your access control
- Outside trim: keyed lever, pull with cylinder or blank plate
- Door closers (LCN, Norton, Dorma) sized and adjusted so the door latches without slamming
- Repair of bars that stick, dog down, or no longer retract the latch
Door closers: the part everyone forgets
A panic bar only secures the door if the door actually closes. Most “my exit door does not lock” calls in Raleigh are a worn or mis-adjusted closer, not the bar. We replace closers with the right size for the door weight and wind exposure, set the sweep and latch speed, and add a hold-open or delayed-action arm where a kitchen or loading dock needs it.
What it costs
A closer replacement is a short job; a new exit device with outside trim is a longer one and depends on the device grade and whether the door needs prep. Call (919) 372-3667 with a photo of the door and we quote it before dispatch. Commercial accounts and property managers get itemized invoices.
Exit hardware done the way the inspector expects
-
Code-correct hardwareUL-listed panic and fire-exit hardware, installed so the door releases with a single motion and no special knowledge.
-
Stock on the truckCommon Von Duprin, Detex and LCN units ride with us, so an emergency repair is not a two-trip job.
-
Tied into your locksWe match outside trim to your master key or access control system instead of adding a stray key.
-
Licensed and insuredNC-licensed technicians, 24/7 for a broken exit door.
Commercial services that go with exit hardware
Panic bar installation across Raleigh and Wake County
Mobile service across Raleigh and every town in Wake County. Typical arrival inside Raleigh is 20–30 minutes.
Panic bar and door closer questions
Does my business legally need a panic bar?
In North Carolina, panic or fire-exit hardware is required on exit doors serving assembly occupancies over a set occupant load, educational occupancies, and wherever the fire marshal requires it; many landlords also require it by lease. If an inspector has flagged a door, we install compliant hardware; if you are unsure, call and describe the space.
Can a panic bar door still be locked from outside?
Yes. The bar always opens from inside, but the outside can have a keyed lever, a pull with a cylinder, or no handle at all (exit only). We match the outside trim to your key system.
Why does my exit door not latch?
Almost always the door closer: worn seals, lost fluid or wrong adjustment. Sometimes the bar has been “dogged” (held retracted) with a hex key. We adjust or replace the closer and un-dog the device on the same visit.
Can you add an alarm so staff stop using the back door?
Yes. An alarmed exit device sounds locally when the bar is pushed and resets with a key, which ends the propped-door habit without blocking the exit.
Do you work on glass storefront doors?
Yes. Aluminum storefront doors take concealed vertical-rod devices or a bar with a special strike; we install both, and we repair the pivots and closers on those doors.
How fast can you come for a broken exit door?
We are 24/7. Inside Raleigh the typical arrival is 20–30 minutes; a temporary secure fix is made the same visit if a part has to be ordered.
Exit door flagged, broken or not latching?
Send a photo of the door when you call and we quote the fix before dispatch.